Achronix Speedster22i SerDes - Manual (Page 57)

Figure 28: Unavailable Fields
As “Figure 28: Unavailable Fields” shows Some fields become unavailable based on earlier
choices made by the user. In this case, the user chooses ‘XAUI’ as the standard (not related to
simple_serdes_design)
Note: For the data-rate above 5.0 GBPS (including 10.3125 GBPS), the ACE GUI eventually
uses the wide-bus architecture and generates a wrapper that transmit/receive 40-bit data
from/to fabric. A later section of this chapter further details the wide-bus architecture.
Section on PMA Settings:
Clicking Next button on Overview page will bring up the section on PMA Settings. The first
page for PMA Settings is shown in “Figure 29: PMA Settings Window – First page”.
Alternatively, the user can click on PMA Settings on the Outline window of “Figure 24:
Outline Window”.
UG028, July 1, 2014 57