Achronix Speedster22i SerDes - Manual (Page 96)

Figure 42: Modifying Register Settings from ACE GUI
To bypass the PCS block, the bit-4 of Reg[17A] needs to be set to 1’b1, i.e., 17A needs to be set
at 8’h10. To do that, the user needs to follow the steps listed below:
• Type 17A in start address and hit tab on keyboard to have the address 17A.
• Select 17A on the table in the middle so that ‘17A’ is displayed in the text-field titled
AHB address.
• type ‘10’ (8’h10) in the text-field for Override Value (“Figure 43 Changing Value of
Register 17A to bypass PCS block”).
• Click Generate button to generate the GUI wrapper.
96 UG028, July 1, 2014