Achronix Speedster22i SerDes - Manual (Page 58)

Figure 29: PMA Settings Window – First page
The first page of the PMA Settings section gives the options to enter lane-specific PMA
settings. This is not relevant to the current design since it uses a single SerDes lane. However,
for completion, “Figure 30: Outline Window, When Lane-Specific PMA Settings are Enabled”
shows the Outline sub-window when the user enables lane-specific RX PMA Equalization
and lane-specific RX PMA PLL.
For the single-lane simple_serdes_design, the PMA Settings section consists of the following
four sub-sections and the corresponding list is displayed in Outline window (top-right sub-
window in “Figure 30: Outline Window, When Lane-Specific PMA Settings are Enabled”):
1. RX PMA Equalization
2. RX PMA PLL
3. TX PMA Driver and
4. TX PMA PLL
The user can browse through these sub-sections by clicking Next buttons or by selecting a
page from the Outline window.
58 UG028, July 1, 2014