ETS-Lindgren HI-1710A Microwave Oven Survey Meter - Manual (Page 17)

www.ets-lindgren.com Specifications 17
3.0 Specifications
Electrical Specifications
Ranges: Four ranges:
0 –1, 0–2, 0–5, and 0–10 mW/cm2
Response Characteristics: 0 to 90% of final value for step
input:
 F0, Raw (Version 3.XX only) —
unfiltered
 F1, Slow —less than three
seconds
 F2, Fast —less than one second
Maximum Power Density: 2.0 Watts/cm 2 (2000 mW/cm 2 )
Power Input: 100 –240 VAC
0.8 –0.4 A max
50/60 Hz
Fuses: 250 Volt, 1.0 Amp, Type T
(5 mm x 20 mm)
Control Inputs: Zero —Dry switch closure to zero
the HI-1710A
RS-232 —Standard 9-pin, 2-way
communications input
Control Outputs: Alarm Output —Form C contact;
24 V 1 Amp
Analog Output —4 VDC max;
1 mA max
RS-232 — Standard 9-pin, 2-way
communications output