Factory default settings – ETS-Lindgren HI-1710A Microwave Oven Survey Meter User Manual
Page 46
Advertising
46
Menu Options, Settings, Command Set
www.ets-lindgren.com
Factory Default Settings
All settings are stored in memory. The last settings used will be
restored each time the HI-1710A is turned off.
RESET returns the HI-1710 to factory default settings. For more
information on RESET, see page 44.
When you receive the HI-1710A, it is configured with the following settings; these
default settings can be used for normal production line testing.
3 or 4 Digits:
3 (two places to the right of the decimal)
Alarm Set Point:
5.0
Audio Alarm:
OFF
Baud Rate:
9600
Display Contrast:
7
Filter (Response):
Slow
Peak Hold:
OFF
Print Mode:
2
Range:
0
–1 mW/cm
2
Advertising