ETS-Lindgren HI-1710A Microwave Oven Survey Meter - Manual (Page 41)

www.ets-lindgren.com Menu Options, Settings, Command Set 41
STATUS
Checks status for the following:
Menu
Option
Serial Port
Command
Function
— S0 Send System Status
— S1 Send Alarm Set Point
— S2 Send Range Number
— S3 Send Filter Number
— S4 Send Bias Voltage
— S5 Send Offset
— S6 Send STIM Value
— S7 Send Power Supply Voltages
— S8 Send RF Reading *
— S9
(Version 3.XX only)
Send Non-Filtered RF
Reading *
* (Version 3.XX only) In Peak Hold mode S8 will return peak
RF value. For the current RF reading, use S9.
The format of information returned depends on the current
print mode. See page 42 for the status message formats for
print modes 0, 1, and 2, and page 43 for print mode 3.
For more information on print modes, see page 37.