ETS-Lindgren HI-1710A Microwave Oven Survey Meter - Manual (Page 43)

www.ets-lindgren.com Menu Options, Settings, Command Set 43
 Print Mode 3
S0: XXXXX  First digit —3 or 4 for number of digits
displayed and transmitted
 Second digit —0 or 1 for auto-range off
or on
 Third digit —0 or 1 for Peak Hold off or
on
 Fourth digit —0 or 1 for in range or
over range
 Fifth digit —0, 1, 2, or 3 for operating
mode
S1: X.XX Alarm trigger point (X.XXX in four-digit
mode)
S2: X Range number 1 –4
S3: X 1 = F1 (Slow)
S4: X.XXX Bias voltage (X.XXX in four-digit mode)
S5: X.XXX Offset; milliwatts (X.XXX in four-digit
mode)
S6: X.XX STIM test value (X.XXX in four-digit
mode)
S7: X.XXX Reference voltage level
X.XXX 5 volt power supply level
X.XXX 8 volt power supply level
X.XXX -8 volt power supply level
S8: X.XX RF reading (X.XXX in four-digit mode)
S9: X.XX (Version 3.XX only)
Raw/unfiltered RF value (X.XXX in
four-digit mode)