ETS-Lindgren HI-1710A Microwave Oven Survey Meter - Manual (Page 45)

www.ets-lindgren.com Menu Options, Settings, Command Set 45
TEST ALARM
Sets or resets the alarm relay located on the back panel of the
HI-1710A.
Menu Option
Setting
Serial Port
Command
ON —
OFF —
VERSION (F IRMWARE ) – V ERSION 3.XX O NLY
Returns the version of installed firmware.
Menu Option
Setting
Serial Port
Command
— VER?
 Format: X.XX
ZERO
Zeros the probe; performs the same function as pressing the ZERO button on the
front panel.
Menu Option
Setting
Serial Port
Command
— Z
When the zero command is received and the RS-232 output
is in mode 2 (default mode), a formatted output message is
sent through the serial port and the probe is zeroed. The
formatted message transmits the RF reading only when the
front panel Peak Hold mode is ON.