Losi LOSB0289 Drift R Manual - Manual (Page 5)

11
7
10
14
GREASE
BAG A (Continued)
2 22 22
Figure 5
Figure 6
Figure 5
!
Step 6. Insert a 5mm x 8mm Bearing (13) into the center of the 42T
diff pulley (11).
!
Step 7. Press a 3/32" diff ball (14) into each of the small holes in
the diff pulley (11) as indicated in Figure 5.
13 14
Figure 6
!
Step 8. Apply a heavy coat of clear diff grease (8) to the exposed
side of the diff ring (10) that is already attached to the outdrive (7).
!
Step 9. Carefully place the diff pulley (11) over the post on the
outdrive (7) so that the diff balls (14) and diff pulley (11) rest against
the greased drive ring (10). Leave the assembly with the 1/16" Allen
wrench (5) standing as shown in Figure 6.
14
13
11
42T PULLEY
"w/ FLANGE