Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 174)

173
Control systems
COMAND telephone*
If “Navigate” is selected, a message ap-
pears indicating that the address is incom-
plete.
̈ Closing message: Select “OK”.
Depending on which data is missing or
cannot be found on the digital map, you
must now either:
ț select a state (province)
ț select a county
ț or enter a city
ț or enter a street
ț or enter a house number
̈ Selecting a state (province):
Select desired state (province) from
the list.
̈ Selecting a county: Select desired
county from the list.
̈ Entering a city: Proceed as described
for destination entry in the “Entering a
city” section (
୴ page 204).
̈ Entering a street: Proceed as de-
scribed for destination entry in the “En-
tering a street” section (
୴ page 207).
̈ Entering a house number: Proceed
as described for destination entry in
the “Entering a house number” section
(
୴ page 212).
If all data is available and matches the dig-
ital map data, the navigation system starts
the route calculation.
Voice entries
Adding or changing a voice entry
̈ Search for the address book entry with
or without a voice entry (
୴ page 166).
̈ Select “Options” Ǟ “Voice Name” Ǟ
“Add” or “Change”.
Subsequent operation is controlled by
voice. Voice Control guides you
through the dialogs.
i If you have added data, COMAND saves your
additions. This means that you do not need to
re-enter this additional data later on.
The COMAND memory saves the additional data
in a special field, which cannot be displayed. The
data, which you have entered in the address
book initially in the display, remains unchanged.
i For voice entries, your vehicle must be
equipped with Voice Control. You can not add
voice entries to address book entries that have
been read-in from the phone book of the mobile
phone.
i You can add one voice entry per address
book entry.