Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 419)

418
Controls in detail
Automatic transmission
Shifting from P to N
Moving the gear selector lever up or down
shifts the automatic transmission out of
park position P:
̈ With the vehicle at a standstill, depress
the brake pedal and keep it pressed.
̈ Move gear selector lever up or down to
resistance point to select neutral
position N.
Shifting from N to R or from N to D
̈ With the vehicle at a standstill, depress
the brake pedal and keep it pressed.
̈ Move gear selector lever up past the
resistance point to select reverse
gear R.
or
̈ Move gear selector down past the
resistance point to select drive
position D.
̈ Release the brake pedal.
̈ Carefully depress the accelerator pedal
to drive off when it is safe to do so.
i The current transmission park position P, re-
verse gear R, neutral position N or drive
position D appears in the multifunction display
(
୴ page 421).
Warning!
G
It is dangerous to shift the automatic trans-
mission out of park position P or neutral
position N if the engine speed is higher than
idle speed. If your foot is not firmly on the
brake pedal, the vehicle could accelerate
quickly forward or reverse. You could lose
control of the vehicle and hit someone or
something. Only shift into gear when the
engine is idling normally and when your right
foot is firmly on the brake pedal.
i The gear selector lever returns to its original
position.
i The gear selector lever returns to its original
position.
i When driving off, the electronic parking
brake is released automatically ( ୴ page 412).