Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 716)

715
Practical hints
Fuses
Before replacing fuses:
̈ Engage the electronic parking brake
(
୴ page 412).
̈ Make sure the automatic transmission
is set to park position P (
୴ page 417).
The gear position indicator in the multi-
function display should be on park
position P.
̈ Turn off all electrical consumers.
̈ Turn off the engine ( ୴ page 415).
̈ Switch off the vehicle’s internal electri-
cal functions (
୴ page 705).
Fuse boxes in engine compartment
̈ Open the hood ( ୴ page 553).
Box on the driver’s side
Example illustration from CL 550
1 4 screws
2 Cover
3 Jumper
Opening
̈ Take the crank from the Operator’s
Manual pouch.
̈ Loosen screws 1 with crank.
̈ Remove jumper 3.
̈ Remove cover 2.
Closing
̈ Attach cover 2.
̈ Attach jumper 3.
̈ Tighten screws 1 with crank.
! The cover must fit properly, as otherwise
moisture or dirt may impair the functionality of
the fuses.