Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 427)

426
Controls in detail
Automatic transmission
Gear ranges
With the automatic transmission in drive
position D and driving in program mode C
or S (
୴ page 427), you can select a gear
range for the automatic transmission to
operate within.
You can limit the gear range by pressing
the left gearshift button on the steering
wheel gearshift control, and reverse the
gear range limit by pressing the right gear-
shift button on the steering wheel gearshift
control (
୴ page 428).
The selected gear range appears in the
multifunction display.
1 Current gear range
Effect
ï The transmission shifts through
sixth gear only (applies to
vehicles with 7-speed automatic
transmission only).
î The transmission shifts through
fifth gear only (applies to
vehicles with 7-speed automatic
transmission only).
é The transmission shifts through
fourth gear only.
Effect
è The transmission shifts through
third gear only.
With this selection you can use
the braking effect of the engine.
ç The transmission shifts through
second gear only.
Allows the use of engine’s
braking power when driving:
ț on steep downgrades
ț in mountainous regions
ț under extreme operating
conditions
æ The transmission operates in
first gear only.
For maximum use of engine’s
braking effect on very steep or
lengthy downgrades.