Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 270)

269
Control systems
COMAND automatic climate control
̄ COMAND automatic climate control
You can operate the automatic climate
control via COMAND or via the buttons on
the automatic climate control panel
(
୴ page 491).
Some of the special climate control func-
tions can only be set via COMAND.
The following automatic climate control
functions can be operated via COMAND: i The components and operating principles of
COMAND can be found on ( ୴ page 83).
Warning!
G
When operating the automatic climate con-
trol, the air that enters the passenger com-
partment through the air vents can be very
hot or very cold (depending on the set tem-
perature). This may cause burns or frostbite
to unprotected skin in the immediate area of
the air vents.
Always keep sufficient distance between un-
protected parts of the body and the air
vents. If necessary, use the air distribution
adjustment ( ୴ page 271) to direct the air to
air vents in the vehicle interior that are not
in the immediate area of unprotected skin.
Warning!
G
Follow the recommended settings for heat-
ing and cooling given on the following pages
and pages in the “Controls in detail” part
( ୴ page 491) Otherwise the windows could
fog up, impairing visibility and endangering
you and others.
Function Page
Temperature 270
Air distribution 271
Air volume 271
Switching off cooling (“AC OFF ”) 272
Central climate control (“Mono”) 273
Footwell temperature 274
Air flow from air vents 275