Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 519)

518
Controls in detail
Useful features
Floormats*
1 Retainer pin
2 Eyelet
Removing
̈ Pull floormat off of retainer pins 1.
̈ Remove the floormat.
Installing
̈ Lay down the floormat in the respective
footwell.
̈ Press the floormat eyelets 2 onto re-
tainer pins 1.
! The lighter socket can be used to accommo-
date 12V DC electrical accessories (up to a max-
imum of 85 W) designed for use with the
standard “cigarette lighter” plug type. Keep in
mind, however, that connecting accessories to
the lighter socket (for example extensive con-
necting and disconnecting, or using plugs that do
not fit properly) can damage the lighter socket.
With the socket damaged, the lighter may no
longer be able to be placed in the heating
(pushed-in) position, or the lighter may pop out
too early with the lighter not hot enough.
i If the engine is off and the cigarette lighter is
being used extensively, the vehicle battery may
become discharged.
Warning!
G
Whenever you are using floormats, make
sure there is enough clearance and that the
floormats are securely fastened.
Floormats should always be securely fas-
tened using the eyelets and the retainer
pins.
Before driving off, check that the floormats
are securely in place and adjust them if nec-
essary. A loose floormat could slip and
hinder proper functioning of the pedals.
Do not place several floormats on top of
each other as this may impair pedal
movement.
i To install or remove the floormat more easi-
ly, move the driver’s seat or front passenger seat
as far to the rear as possible (
୴ page 368).