Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 404)

403
Controls in detail
Power windows
̈ Switch on the ignition ( ୴ page 365).
̈ Opening: Press the lower part of
switch
1 to 4 ( ୴ page 402) to the re-
sistance point.
The corresponding window will move
downwards until you release the
switch.
̈ Closing: Press the upper part of
switch
1 to 4 ( ୴ page 402) to the re-
sistance point.
The corresponding window will move
upwards until you release the switch.
̈ Express-opening: Press the lower part
of switch
1 to 4 ( ୴ page 402) past
the resistance point and release.
The corresponding window opens com-
pletely.
̈ Express-closing (door windows
only): Press the upper part of
switch
1 to 4 ( ୴ page 402) past the
resistance point and release.
The corresponding window closes com-
pletely.
i You can also open or close the windows us-
ing the SmartKey, see “Summer opening fea-
ture” (
୴ page 404) and “Convenience closing
feature” ( ୴ page 404).
Depending on current position, the windows may
also open or close when the air recirculation
button
, ( ୴ page 491) is pressed and held
for 2 seconds.
i Operating the windows from the rear is not
possible if you activate the override switch
(
୴ page 63).
i If PRE-SAFE ® has been activated, the front
side windows close automatically until only a
small gap remains.
i With the SmartKey in starter switch
position 0 or removed from the starter switch,
the power windows can be operated:
ț until you open the driver’s or passenger’s
door
ț for at least 5 minutes if no door was opened
Warning!
G
If you press and hold the switch up when
closing the window, and upward movement
of the window is blocked by some obstruc-
tion including but not limited to arms, hands,
fingers, etc., the automatic reversal will not
operate.
Warning!
G
Driver’s door only:
If within 5 seconds you again press the
switch past the resistance point and re-
lease, the automatic reversal will not
operate. ୴୴