Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 523)

522
Controls in detail
Useful features
Installing a different mobile phone
cradle
Example illustration
1 Contact plate
2 Recesses
3 Mobile phone cradle
̈ Insert mobile phone cradle 3 into
recesses 2 of contact plate 1.
̈ Push mobile phone cradle 3 forward
until it engages.
Tele Aid
The Tele Aid system
(Telematic Alarm Identification on De-
mand)
The Tele Aid system consists of three
types of response:
ț automatic and manual emergency
ț Roadside Assistance, and
ț information
The Tele Aid system is operational provid-
ing that the vehicle’s battery is charged,
properly connected, not damaged and mo-
bile phone and GPS coverage are available.
The speaker volume of a Tele Aid call can
be adjusted when using the volume control
on the multifunction steering wheel. To
raise, press button
æ and to lower,
press button ç or use the COMAND
volume thumbwheel , on the lower
part of the front center console
(
୴ page 94).
̈ To activate, press the SOS button, the
Roadside Assistance button
• or
the Information button ¡, depend-
ing on the type of response required.
! The initial activation of the Tele Aid system
may only be performed by completing the sub-
scriber agreement and placing an acquaintance
call using the Information button
¡. Failure
to complete either of these steps will result in a
system that is not activated.
If you have any questions regarding activation,
please call the Response Center at
1-800-756-9018 (in the USA) or
1-888-923-8367 (in Canada).
i The Tele Aid system utilizes the mobile
phone network for communication and the GPS
(Global Positioning System) satellites for vehicle
location. If either of these signals are unavail-
able, the Tele Aid system may not function and if
this occurs, assistance must be summoned by
other means.