Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 287)

286
Control systems
Instrument cluster control system
Trip menu
In the “Trip” menu, you can show an addi-
tional display for the speedometer and call
up or reset your vehicle’s statistical data.
Standard display
In the standard display, the trip odometer
and main odometer are shown in the
multifunction display.
̈ Press ( or & to select the “Trip”
menu.
1 Main odometer
2 Trip odometer
Fuel consumption statistics since start
̈ Press ( or & to select the “Trip”
menu.
̈ Press % to select “From Start”.
1 Distance driven since start
2 Time elapsed since start
3 Average speed since start
4 Average fuel consumption since start
Fuel consumption statistics since last
reset
̈ Press ( or & to select the “Trip”
menu.
̈ Press % or $ to select “Since
Reset”.
1 Distance driven since last reset
2 Time elapsed since last reset
3 Average fuel consumption since last re-
set
4 Average speed since last reset
i The menu overview can be found on
( ୴ page 284).
i All values that are based on the last start are
reset when you turn off the vehicle’s engine for
more than four hours (
୴ page 415).
i If you turn the SmartKey to position 1 or 2
again during this time, the values will not be re-
set. After 9 999 hours or 99 999 miles (kilome-
ters), the fuel consumption statistics after start
are automatically reset.
i After 9 999 hours or 99999 miles (kilome-
ters), the fuel consumption statistics since last
reset are automatically reset.