Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 692)

691
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
You can only change the halogen bulbs for,
high-beam flasher lamp, corner-illuminat-
ing lamp, and IR emitter* lamp.
Before you start to replace a bulb for a
front lamp, do the following first:
̈ Turn the exterior lamp switch to M
( ୴ page 391).
̈ Open the hood ( ୴ page 553).
Headlamp, left
1 Cover
2 Tab
̈ Removing cover: Pull cover 1 on
tab 2 in direction of arrow and re-
move cover 1.
Bi-Xenon headlamps
High beam flasher lamp
Headlamp, left
1 Installation device
̈ Pull installation device 1 up (left
headlamp) or down (right headlamp)
and remove the bulb together with
installation device
1 from the head-
lamp.
Warning!
G
Do not remove the cover for the Bi-Xenon
headlamp. Because of high voltage in Xenon
lamps, it is dangerous to replace the bulb or
repair the lamp and its components. We rec-
ommend that you have such work done by a
qualified technician.
୴୴