Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 177)

176
Control systems
COMAND telephone*
̈ Importing: Start data transfer on the
external device (see operating instruc-
tions of the device concerned).
If there is no address book entry with
the same first name and last name,
COMAND imports the data.
If there is already an address book en-
try with the same first name and last
name, a prompt will appear asking
whether the existing data should be
overwritten.
̈ Select “Yes” or “No”.
The existing address book entry will be
overwritten or not, depending on your
selection.
Bluetooth ® settings
General information about Bluetooth ®
Bluetooth ® technology is the standard for
short-range wireless technologies, suitable
for transmitting voice and data. It is possi-
ble to connect Bluetooth
® devices wire-
lessly. Bluetooth ® can be used to
exchange vCards or make calls using a
headset.
Bluetooth ® technology uses the freely
available ISM (Industrial Scientific Medi-
cal) wireless network that works at
2.45 GHz. Ranges of up to ten meters are
possible with Bluetooth
® .
Activate or deactivate Bluetooth ®
̈ Select “Telephone” Ǟ “Data/Connec-
tions”
Ǟ “Bluetooth” Ǟ “Deactivate
Bluetooth”.
You have activated or deactivated
Bluetooth
® . A checkmark appears
when Bluetooth ® is deactivated.
Connecting Bluetooth ® devices
It is possible to establish a Bluetooth ® con-
nection between COMAND and the follow-
ing types of device:
ț Mobile phone (only for transferring
business cards)
ț Headset
ț Laptop/PDA
You can connect up to twelve devices to
COMAND but only one device can be ac-
tive at a time.
The connection process includes search-
ing for the device and its subsequent au-
thorization.
i To connect a Bluetooth ® device, the
Bluetooth ® function must be activated in
COMAND and in the device concerned. The
Bluetooth
® device must also be set to “visible”
or “findable” in order for COMAND to find and
display it. For the setting procedures, please see
the operating instructions for the Bluetooth
®
device.