Mercedes-Benz CL-Class 2008 COMAND Manual User Manual
Page 701
700
Practical hints
Flat tire
1 Wheel bolt for light alloy rims
2 Wheel bolt for Minispare wheel
(located in trunk with spare wheel)
̈
Clean contact surfaces of wheel and
wheel hub.
̈
Guide the Minispare wheel onto the
alignment bolt and push it on.
̈
Insert wheel bolts and tighten them
slightly.
̈
Unscrew the alignment bolt, install the
last wheel bolt and tighten slightly.
Warning!
G
Only use genuine Mercedes-Benz wheel
bolts. Other wheel bolts may come loose.
Do not tighten the wheel bolts when the ve-
hicle is raised. Otherwise the vehicle could
fall off the jack.
!
Wheel bolts
2 must be used when mount-
ing a Minispare wheel. The use of any wheel
bolts other than wheel bolts
2 for a Minispare
wheel will physically damage the vehicle’s
brakes.
Warning!
G
Make sure to use the original length wheel
bolts when remounting the original wheel
after it has been repaired.
!
To avoid paint damage, place wheel flat
against hub and hold it there while installing first
wheel bolt.