Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 601)

600
Operation
Vehicle care
̈ Clean a wide area of the bumpers
surrounding the sensors
2.
̈ Restart the engine after cleaning sen-
sors.
Cleaning the Parktronic* system
sensors
1 Parktronic system* sensors in front
bumper
̈ Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water and a soft,
non-scratching cloth to clean
sensors
1 on the bumpers.
! To prevent scratches or damage, never
apply strong force and only use a soft,
non-scratching cloth when cleaning the sensor
cover and/or bumper area near sensors. Do not
attempt to wipe dirty sensors and/or bumper
with a dry cloth or sponge.
! Do not apply strong pressure to the sensor
covers. Applying strong pressure may damage
the sensor covers.
Follow the instructions provided by the power
washer manufacturer on maintaining a distance
between the vehicle and the nozzle of the power
washer.
! To prevent scratches, never apply strong
force and only use a soft, non-scratching cloth
when cleaning the sensors. Do not attempt to
wipe dirty sensors with a dry cloth or sponge.
୴୴