Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 275)

274
Control systems
COMAND automatic climate control
The “Mono” function is automatically
switched off when you:
ț change an automatic climate control
setting for the front passenger’s side
using COMAND
ț operate a button from the automatic
climate control for the front passen-
ger’s side
ț operate one of the buttons for the rear
climate control system
Adjusting footwell temperature
The “Footwell Temperature” function is
used to adjust the temperature difference
between the footwell and the rest of the
passenger compartment.
The higher the selected value, the higher
the temperature in the footwell will be.
̈ Select climate control settings Ǟ Cen-
tral climate control menu.
̈ Selecting “Footwell Temperature”:
Slide
q m r or rotate y m z and then
press n.
̈ Changing temperature difference:
Slide
q m r or rotate y m z .
̈ Exiting menu: Press n, back
button L in the center console
( ୴ page 84) or slide o m p .
The setting is saved.
i In automatic mode, this setting optimizes
the footwell temperature when outside tempera-
tures are low.