Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 258)

257
Control systems
COMAND system settings
Setting the date
̈ Select “Vehicle” Ǟ “System Settings”
Ǟ “Time” Ǟ “Date”.
̈ Selecting month, day or year:
Slide
o m p .
̈ Setting value: Rotate y m z or
slide q m r .
̈ Saving setting: Press n.
Setting the time/date format
̈ Select “Vehicle” Ǟ “System Settings”
Ǟ “Time” Ǟ “Format”.
The format list appears. The dots R in
front of the list entries indicate the cur-
rent setting.
̈ Changing format setting:
Select desired format.
̈ Saving setting and exit the menu:
Slide
o m p .
Voice Control settings
Switching help window on or off
̈ Select “Vehicle” Ǟ “System Settings”
Ǟ “Voice Control”.
̈ Select “Help Window”.
You can switch the help window on or
off. A checkmark appears when the
help window is switched on.
Individualization
Using individualization, you can fine-tune
Voice Control to your own voice and thus
improve voice recognition. The ability of
the system to recognize the commands of
other users does not deteriorate as a re-
sult.
Individualization consists of two parts. You
train the system to recognize digits in the
first part and specific commands in the
second part.
Starting new individualization
̈ Select “Vehicle” Ǟ “System Settings”
Ǟ “Voice Control” Ǟ “Start new indi-
vidualization”.
A prompt appears asking whether you
would like further information.
̈ Select “Yes” or “No”.
If you select “No”, the first part of indi-
vidualization begins.
If you select “Yes”, an information dis-
play will be shown with audio instruc-
tion.
̈ Closing display: Select “OK”.
The first part of individualization be-
gins.
i It is only possible to start individualization
with the vehicle stationary. After starting the
session, the system will guide you through the in-
dividualization by means of acoustic instruc-
tions.
୴୴