Mercedes-Benz CL-Class 2008 COMAND Manual - Manual (Page 602)

601
Operation
Vehicle care
Cleaning the driving systems sensors
The sensors are integrated in the front and
rear bumpers and cannot be seen from the
outside. They work with the following sys-
tems:
ț BAS Plus*
ț PRE-SAFE ® Brake*
ț Blind Spot Assist*
ț Park Assist*
ț Advanced Parking Guidance*
1 Bumper area near sensors
̈ Switch off the ignition ( ୴ page 365).
̈ Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water and a soft,
non-scratching cloth to clean the
bumper area near sensors.
! To prevent scratches or damage to the sur-
face, never apply strong force and only use a
soft, non-scratching cloth when cleaning the
bumper area near sensors. Do not attempt to
wipe a dirty bumper with a dry cloth or sponge.