Setting up your machine – SINGER 1 ONE Plus Instruction Manual User Manual

Page 12

Advertising
background image

10

Power/light switch “OFF”
Interrupteur moteur/lumière

« Fermé » (OFF)
Interruptor corriente/luz “OFF”

Power/light switch “ON”
Interrupteur moteur/lumière

« Ouvert » (ON)
Interruptor corriente/luz “ON”

SETTING UP YOUR MACHINE

Be sure to wipe off any surplus oil from

needle plate area before using your machine

the first time.

POWER LINE CORD/FOOT CONTROL

Connect the plug of the power line cord into

the cord socket (1) and your wall outlet (2)

as illustrated.
Connect the foot control plug (3) into the

machine socket.

POWER/LIGHT SWITCH

Your machine will not operate until the

power/light switch is turned on. The same

switch controls both the power and the light.
When servicing the machine, or changing

needles, etc., machine must be disconnected

from the power supply.

Always disconnect the machine from power

supply by removing the plug from the electrical

outlet.

NOTE: W h e n f o o t c o n t r o l i s

disconnected, the machine will not

operate.

Power line cord

Cordon d’alimentation

Cordón de la linea eléctrica

1

3

Foot control

Rhéostat

Control por pedal

Machine socket

2

Mettez l’interrupteur moteur/

lumière à la position « Fermé »
Poner el Interruptor de corriente/luz

en “OFF”

Prise du cordon

de la machine
Conector de la máquina

Pin plug

Butée

Conector

Set power/light switch at “OFF”

Advertising
This manual is related to the following products: