Operation switches – SINGER CE-100 Futura User Manual

Page 12

Advertising
background image

12

Reverse stitch switch

Needle up/down switch

Start/stop switch

(For embroidery only)

LED indicator
Témoin a diode

Indicador LED

Interrupteur couture arrière

Interrupteur marche/arrêt

(Pour la broderie seulement)
Pulsador de comienzo/parada

(Sólo para bordado)

Interruptor de puntadas

hacia atrás

Interruptor agja arriba/abajo

Positionnement haut/bas

de l’aiguille

LED INDICATOR
¿

Green light indicates machine is ready to start.

¿

Red light indicates machine is operating.

¿

Flashing red light indicates a problem or an error.

* Flashing for 2 - 3 seconds shows that an incorrect operation

was made.

* Continuous flashing indicates that machine malfunctions.

OPERATION SWITCHES

NEEDLE UP/DOWN SWITCH

When the needle up/down switch is pushed, the needle moves

and stops at its lowest position. If the switch is pushed once

more, the needle moves and stops at its highest position.
This function is useful for sewing curves, corners and topstitching.

REVERSE STITCH SWITCH

Reverse sewing is carried out while the reverse stitch switch is

pushed (only for normal sewing).
NOTE: If the power cord is disconnected from the wall outlet

during sewing, or if the sewing machine stops due to a
power outage, the sewing machine will not operate

immediately even when the power is restored. To start

the sewing machine again, turn the power switch to OFF
and then back to ON again, and then start the machine.

START/STOP SWITCH

This switch works only when sewing embroidery.

Advertising
This manual is related to the following products: