SINGER CE-100 Futura User Manual

Page 20

Advertising
background image

20

WINDING BOBBIN

1. Place a spool of thread on the spool pin, and secure it with

the spool pin cap. Pull the thread out from the spool through

thread guide.

2. Pull end of thread through hole in bobbin as shown.

3. Push bobbin winder shaft to far left position, if it is not already

there. Place bobbin onto shaft with end of thread coming
from top of bobbin. Push bobbin winder shaft to the right until

it clicks. Hold onto end of thread.

4. Start machine. Bobbin will automatically stop turning when

completely filled. Push shaft to the left to remove bobbin and

cut thread.

1

2

3

4

Advertising
This manual is related to the following products: