Thread tension control – SINGER CE-100 Futura User Manual

Page 82

Advertising
background image

82

OPERATION SWITCHES WHEN

EMBROIDERY UNIT IS ATTACHED

OPERATION SWITCHES

Reverse stitch switch

Needle up/down switch

Start/stop switch

(For embroidery only)

LED indicator

TÉMOIN A DIODE

Indicador LED

Touche couture arrière

Touche marche/arrêt

(Pour la broderie seulement)
Pulsador de comienzo/parada

(Sólo para bordado)

Interruptor de puntadas

hacia atrás

Interruptor agja arriba/abajo

Positionnement haut/bas

de l’aiguille

START/STOP MACHINE
When start/stop switch is pushed, machine starts slowly, and

when the switch is pushed once more, the needle moves and

stops at its highest position.

NEEDLE UP/DOWN SWITCH
Embroidering can be advanced one stitch at a time (The hoop
moves.), after the embroidery data has been transferred.

To advance continuously, press and hold this switch.

REVERSE STITCH SWITCH
Embroidering can be reversed one stitch at a time (The hoop

moves.), after the embroidery data has been transferred.

To reverse continuously, press and hold this switch. Embroidering
can be reversed until the start of the embroidery data, after which

it will no longer move.

LED INDICATOR
¿

Green light indicates machine is ready to start.

¿

Red light indicates machine is operating.

¿

Flashing red light indicates a problem or an error.

* Flashing for 2 - 3 seconds shows that an incorrect operation

was made.

* Continuous flashing indicates that machine malfunctions.

THREAD TENSION CONTROL

Set it at “ E ” for embroidery to loosen thread tension.
You may wish to re-adjust thread tension according to the type

of fabric and threads being used.

Advertising
This manual is related to the following products: