SINGER CE-100 Futura - Manual (Page 94)

94
CHANGING LIGHT BULB
CAUTION
Always disconnect the machine from power supply
by removing the plug from the wall-outlet.
1. Remove the screws, and face cover.
2. While holding the socket, move it back and forth gently to
remove it from the bracket.
3. Take the light bulb out of the socket and insert a new light
bulb (part # 085303) securely into the socket so that the pins
on the light bulb fit into the pin holes in the socket.
4. Insert the socket into the hole in the bracket.
5. Return the face cover to its original position. Align the face
cover so that the projection fits onto the pin on the sewing
machine.
1, 5
3
Screw
Vis
Guia
Face cover
Plaque frontale
Cubierta frontal
Bracket
Support
Mensula
2
Remove
Retirez
Saque
Replace
Remplacez
Cambie
Pin
Butée
Pasador
Pin hole
Trous de broches
Agujeros de clavijas
Light bulb
Ampoule d’éclairage
Bombilla
Remove
Retirez
Saque
Replace
Remplacez
Cambie
Light bulb
Ampoule d’éclairage
Bombilla
Socket
Connecteur
Conector
Remove
Retirez
Saque
Replace
Remplacez
Cambie
Socket
Connecteur
Conector
Bracket
Support
Mensula
4
Light bulb
Ampoule d’éclairage
Bombilla
Socket
Connecteur
Conector