Performance checklist – SINGER CE-100 Futura User Manual

Page 96

Advertising
background image

96

5. PERFORMANCE CHECKLIST

GENERAL PROBLEMS

Machine does not sew.

*Power switch is turned off.- Turn on the switch.
Machine jams/knocks.

*Thread is caught in hook.- Clean hook (see page 96 - 97).

*Needle is damaged.- Replace needle (see page 30 - 31).
Fabric does not move.

*Presser foot is not lowered - lower presser foot.

*Feed dog control is lowered (see page 16 - 17).

STITCHING PROBLEMS

Machine skips stitches.
*Needle is not all the way up into needle clamp. - See page 30

- 31.

*Needle is bent or blunt. - Replace needle (see page 30 -

31).

*Machine is not threaded correctly. - See page 28 - 29.

*Thread is caught in hook. - Clean hook (see page 96 - 97).
Stitches are irregular.

*Needle size is not correct for thread and fabric. - See page 30

- 31.

*Machine is not threaded correctly. - See page 28 - 29.

*Top thread tension is too loose. - See page 32 - 33.

*Fabric is being pulled or pushed against machine feeding

action. - Guide it gently.

*Bobbin has not been wound evenly. - Rewind bobbin.

Needle breaks.
*Fabric is being pulled or pushed against machine feeding

action. - Guide it gently.

*Needle size is not correct for thread and fabric. - See page 30

- 31.

*Needle is not all the way up into the needle clamp (See page 30

- 31).

THREAD PROBLEMS

Thread bunches.

*Top and bobbin threads are not drawn back under presser

foot before starting seam. - Draw both threads back under

presser foot about 4 inches (10 cm) and hold until a few

stitches are formed.

Needle thread breaks.

*Machine is not threaded correctly. - See page 28 - 29.

*Top thread tension is too tight. - See page 32 - 33.
*Needle is bent. - Replace needle (see page 30 - 31).

*Needle size is not correct for thread and fabric - See page 30

- 31.

Bobbin thread breaks.

*Bobbin case is not threaded correctly. See page 22 - 23.

*Lint accumulates in bobbin case or hook. - Remove lint

(see page 96 - 97).

Fabric puckers.

*Top thread tension is too tight. - Adjust thread tension

(see page 32 - 33).

*Stitch length is too long for sheer or soft fabric. - Shorten

stitch length.

Advertising
This manual is related to the following products: