SINGER CE-100 Futura User Manual

Page 70

Advertising
background image

70

PREPARATION FOR EMBROIDERY

SEWING

SECURING MATERIAL IN EMBROIDERY

HOOP

1. Loosen hoop adjusting screw on outer frame and remove

inner frame. Place material between inner and outer frame.

2. Slightly tighten the hoop adjusting screw and pull material

edges to remove slack.

Fit the two frames together by pressing down on the inner
frame.

a. Tighten hoop adjusting screw.

b. Press down on the inner frame to stretch the material

into the outer frame, and then re-tighten the screw.

c. Tighten the material in the frames so that it makes a

sound like a drum when the tightened surface is tapped

with a finger.

Once material is properly positioned in embroidery
frame with no slack, securely tighten the screw.

2

1

Hoop adjusting screw

Vis de réglage de cerceau
Tornillo de ajuste de aro

Advertising
This manual is related to the following products: