CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 15)

Getting Started 9145E NID Software User’s Manual
Main Menu
7
2.4 Main Menu
Figure 2-3 Main Menu
Following is a brief description of the Main Menu items.
1. System Configuration - The System Configuration menu is used to view and set values for system
information and TCP/IP management communications parameters.
2. Diagnostics - The Diagnostics menu is used to set up various troubleshooting tests, including
Loopback, Latency/Jitter, PING tests, VLAN Loopback, or Cable Diagnostic, and to configure and run
the Performance Monitoring (PM), Service Availability Monitoring (SAM), and Protected Link
Performance Monitoring (PLPM).
3. Port Information - The Port Information menu is used to ascertain the current conditions for all
ports in the 9145E, to set and view the configuration information for specific ports, check Link Status
and Layer 2 Statistics.
4. System Alarms - The System Alarms screen is used to view current alarm conditions.
5. System Log - The System Log screen displays a list of recent traps, alarms, and events.
6. Utilities - The Utilities menu is used to set-up and display basic functional information.
7. Software Upgrade - The Software Upgrade screen is used to download and install new firmware
using TFTP, swap firmware banks, and reset the 9145E.
8. Manage Logged In Users - The Manage Logged In Users screen is used by the administrator to
view current users, and to terminate user sessions when required.
9. 802.3AH OAM - The OAM menu is used to set, change, and view various link layer operational,
administration and maintenance (OAM) functions.
10. CoS Configuration - The Class of Service (CoS) Configuration menu is used to enable or disable
ingress and egress classification support, as well as establishing ingress and egress mapping, setting
up queue configuration, creating drop profiles and viewing queue statistics.
11. Logout - Logout terminates your current session.
Canoga Perkins Corp. Ethernet Network Interface Device 09-SEP-2008
Model 9145E-101-2-0 V02.10 F121 19:03:55
---------------------------------------MAIN MENU--------------------------------
1) System Configuration
2) Diagnostics
3) Port Information
4) System Alarms
5) System Log
6) Utilities
7) Software Upgrade
8) Manage Logged In Users
9) 802.3AH OAM
10) CoS Configuration
11) Logout
------------------------------------Messages------------------------------------