CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 77)

Utilities 9145E NID Software User’s Manual
Static ARP Table
69
Figure 7-3 PING Generation screen
7.6 Static ARP Table
The Static ARP table is used to define mapping between IP address and MAC address, and assign them to
a port, thus bypassing the ARP mechanism. A maximum of 10 static ARP entries are available.
From the Utilities menu, type 7 and press Enter. The Static ARP Table screen (Figure 7-4) opens.
Figure 7-4 Static ARP Table Screen
Canoga Perkins Corp. Ethernet Network Interface Device 22-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02:59:35
------------------------------------PING GENERATION---------------------------------------
1) Ping to Address : 0.0.0.0
2) Ping from Address : Mgr IP 172.16.142.120
3) Ping Count : 5
4) Ping VLAN ID : 0
5) Ping Payload Size (40 - 9950) : 40
6) Ping DF Bit : Clear
7) Start Pinging
Select [1-7]:
---------------------------------------------Messages----------------------------------------------
Canoga Perkins Corp. Ethernet Network Interface Device 04-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02:59:35
------------------------------------STATIC ARP TABLE----------------------------
IP
Address MAC Address Port
---------- ----------- ----
92.168.1.102 45-54-25-88-74-22 User
94.148.1.156 46-57-55-81-73-21 Mgmt
45.122.4.121 44-52-44-23-76-98 Net
97.198.3.246 67-76-65-56-45-54 User
94.133.1.765 68-63-22-19-76-55 Net
Add or Delete an entry (1=Add, 2=Delete from table):
------------------------------------Messages------------------------------------