1 three levels of security – CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 User Manual

Page 61

Advertising
background image

Port Information

9145E NID Software User’s Manual

Port Configuration

53

5.2.3.3 P-Bit Translation Table

The 9145E can change the P-Bit setting in VLAN ID tags on Service frames to change their priority status
in the network. To change incoming Priority Bit Translations, type 3 and press Enter. The P-Bit Translation
Table (Figure 5-9) opens.

1.

To modify the P-Bit translation data, type the number of the P-Bit you wish to translate, from 1 to 8,
and press Enter. Enter the P-Bit value and press Enter. Use Tab to switch between ports. The P-
Bit will be changed on the ingress direction for the port. Press Enter to confirm changes. Press
Enter to confirm changes.

2.

To Enable or Disable P-Bit translation, type 9, press Enter, and use the Space Bar to select
between Yes and No. Use Tab to switch between ports.

Figure 5-9 P-Bit Translation Table

5.2.4 Port Filters

Use Port Filters to set filters on the User and Network ports to filter certain management and control
Ethernet frames from the data stream and control traffic coming in or out of specific ports.

To configure the port filters, select Port Filters (4) from the Port Configuration menu and press Enter. The
Port Filters screen (Figure 5-10) opens. To set the port filters, type the filter item number, 1 through 6, and
press Enter.

Canoga Perkins Corp. Ethernet Network Interface Device 12-SEP-2008

Model 9145E-101-2-0 V02.10 F121 02:59:35

---------------------------------------P-BIT TRANSLATION TABLE----------------------------------

User Port

Net Port


1) Incoming P-Bit 0 translated to

0

0

2) Incoming P-Bit 1 translated to

1

1

3) Incoming P-Bit 2 translated to

2

2

4) Incoming P-Bit 3 translated to

3

3

5) Incoming P-Bit 4 translated to

4

4

6) Incoming P-Bit 5 translated to

5

5

7) Incoming P-Bit 6 translated to

6

6

8) Incoming P-Bit 7 translated to

7

7


9) P-Bit Translation Enabled?

No No

Enter P-Bit value between 0 and 7, or TAB to change columns:

---------------------------------------------------Messages--------------------------------------------------

Advertising