CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 33)

System Configuration 9145E NID Software User’s Manual
Account Configuration
25
In the default configuration, the supervisor access level is allowed complete access to all of the 9145E’s
features including configuring the 9145E’s security system. The operator access level is allowed access to
the 9145E features except those relating to the 9145E’s security system. This level can be configurable by
the administrator.
The observer access level is allowed access to the 9145E features that do not modify the 9145E’s
configuration. This level can be configurable by the administrator. Feature Access Level Configuration The
assignment of access levels has a default configuration built into the 9145E. Creating and downloading a
text file called 9145e.cap to the 9145E can change this assignment, however. This file contains mappings
between module features and the access level required to access the feature. As an example the entry
that controls access to the Maximum Frame Size setting looks like:
maxFrameSize=operator
This entry indicates that to change the Maximum Frame Size, a user’s account must have operator access
level or greater.
This 9145e.cap file is downloaded to the 9145E via the normal FTP/SFTP/TFTP in the same manner as
downloading a firmware file to the 9145E. The same file may be downloaded to multiple 9145E's to ensure
that each is following the same security rules.
3.4.2 Add or Edit an Account
To add an account select Add (A). The Edit User Account screen (Figure 3-16) will open with all positions
blank. When the account information has been entered successfully, press Esc to return to the Account
Configuration menu.
To edit an account select Edit (E) and use the Space Bar to select an account. The Edit User Account
screen (Figure 3-16) will open with all positions populated.
Figure 3-16 Edit User Account Screen
Canoga Perkins Corp. Ethernet Network Interface Device 22-SEP-2008
M odel 9145E-101-2-0 V02.10 F121 02: 59: 35
-------------------------------------EDIT USER ACCOUNT-----------------------------------
Usernam e : obs
1. Account State : Enabled
2. Access From : UI/SNMPv3
3. Access Level : Observer
4. Description :
5. UI Pas sword : ***************
6. UI Pas sword Expires : No
UI Pas sword Expires i n (days) : 0
7. Allow UI Lockout Of User : Yes
8. Allow UI Logout Of User : Yes
9. UI Login Locked State : Unlocked
10. SNM Pv3 Authentication Protocol : None
11. SNM Pv3 Authentication Password : N/ A
SNM Pv3 Authentication Key : N/ A
12. SNM Pv3 Privacy Protocol : None
13 SNM Pv3 Privacy Password : N/ A
SNM Pv3 Privacy Key : N/A
Select [1-13]:
--------------------------------------------Mes sages -----------------------------------------------