CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 26)

9145E NID Software User’s Manual System Configuration
IP/SNMP Agent Configuration
18
d. Type in the Authentication Password and press Enter. Type in the password again and
press Enter. The Authentication Key will automatically be entered (It can be modified to
match the SNMP manager's key if needed.).
e. Cycle through the Privacy Protocol settings (DES or None) using the Space Bar and press
Enter to accept the setting.
f. Type in the Privacy Password, if required, and press Enter, then type in the password again
and press Enter. The Privacy Key will automatically be entered (It can be modified to match
the SNMP manager's key if needed.).
g. Cycle through the Security Levels (No Auth/No Priv, Auth/No Priv, or Auth/Priv) using the
Space Bar and press Enter to accept the setting.
Figure 3-12 V3-Inform Notification Type Parameter
h. Accept the Retries entry or modify it by using Backspace and typing the new value and
press Enter (default is 3).
i. Accept the Timeout in Seconds entry or modify it by using Backspace and typing the new
value and press Enter (default is 5).
j. Press Esc to return to the Trap Table menu (Figure 3-7).
Canoga Perkins Corp. Ethernet Network Interface Device 12-SEP-2008
Model 9145E-101-2-0 V02.10 F121 00:35:00
----------------------------------EDIT TRAP/NOTIFICATION TYPE-----------------------
IP Address
: 172.016.002.034
Trap/Notification Port : 162
Notification Type : V3-Inform
1. Security Name
:
2. Engine ID :
3. Authentication Protocol : SHA
4. Authentication Password : ********
5. Authentication Key
: 646EDB8608522E7733B4E38D28ABC8A130D8D041
6. Privacy Protocol : None
7. Privacy Password : N/A
8. Privacy Key : N/A
9. Security Level : No Auth/No Priv
10. Retries : 3
11. Timeout in Seconds : 5
Enter the inform security name [32 characters maximum]
---------------------------------------------Messages----------------------------------------------