CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 52)

Diagnostics 9145E NID Software User’s Manual
Cable Diagnostics
44
LBR Out Of Sequence: - Number of LBRs been received in this test, which are out of sequence.
LBR Unexpected: - Number of unexpected LBRs received during this test.
4.5 Cable Diagnostics
The cable diagnostics function provides UTP cable testing. Its function is to determine the UTP cable
status and can provide a very useful physical link troubleshooting tool.
1. When the cable is OK, cable diagnostics indicates the length of the cable.
2. When there is a problem, cable diagnostics indicates how far from the interface connection the
fault is and information about the fault.
To access the Cable Diagnostics screen, type 5 and press Enter. The Cable Diagnostics screen (Figure 4-
10) opens.
User Port - To run the diagnostics test on the User port, type 1 and press Enter. When the test is
complete, press Esc to return to the Diagnostics menu.
Network Port - To run the diagnostics test on the Network port, type 2 and press Enter. When the test
is complete, press Esc to return to the Diagnostics menu.
Figure 4-10 Cable Diagnostics Screen
Canoga Perki ns Corp. Ethernet Net work Interface Device 12-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02: 59: 35
------------------------------------CABLE DIAGNOSTICS ------------------------------------
1) User Port
2) Network Port
Select [1-2]:
Port
ID:
Pair
1 State:
Pair 2 State:
Pair 3 State:
Pair 4 State:
Pair 1 Length:
Pair 2 Length:
Pair 3 Length:
Pair 4 Length:
---------------------------------------------Messages----------------------------------------------