CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 40)

System Configuration 9145E NID Software User’s Manual
SYSLOG Client Configuration
32
4. SNTP Client Delay Time (seconds) - Sets the delay for the initial SNTP request. If not zero, the
request will be sent at a random interval within the delay time. This is used to prevent multiple NID
requests at the same time in the event that all NIDs power down and power up at the same time.
5. SNTP Server IP Address - Two SNTP servers can be configured
• IP Address: Set the address for the SNTP server. IP address 0.0.0.0 indicates no server.
• Retries: How many times the 9145E tries to synchronize before trying the alternate server.
Range is 0 to 10
• Timeout (seconds): Wait period between unsuccessful attempts. Range is 1 to 30
• Priority: Set which server to contact first. Range is 1 to 255 with 1 the highest priority and 255
the lowest. If the priority is the same for the two servers, the 9145E alternates tries between
the servers.
When entries are completed, press Esc to return to the System Configuration menu.
3.8 SYSLOG Client Configuration
Use the SYSLOG Client Configuration screen to configure the 9145E to send log messages to a SYSLOG
Server. From the System Configuration menu, select SYSLOG Client Configuration (8) and press Enter.
The SYSLOG Client Configuration screen (Figure 3-20) opens.
On the SYSLOG Client Configuration screen, type the number of the SYSLOG setting to change and press
Enter. When entries are completed, press Esc to return to the System Configuration menu.
Figure 3-20 SYSLOG Client Configuration screen
Syslog Server IP Address - Configure the IP address of the Syslog server. Two Syslog servers can
be configured.
Syslog Server Port - Configure the Syslog Server port. The standard syslog port is 514. The port
setting should match with the Syslog server UDP port setting (1 - 65535).
Canoga Perkins Corp. Ethernet Network Interface Device 22-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02:59:35
--------------------------SYSLOG CLIENT CONFIGURATION----------------------------
1. Syslog Server IP Address
: 000.000.000.000
Syslog Server Port : 514
Syslog Server Mask : Debug
2. Syslog Server IP Address
: 000.000.000.000
Syslog Server Port : 514
Syslog Server Mask : Debug
Select [1-2]:
---------------------------------------------Messages----------------------------------------------