CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 27)

System Configuration 9145E NID Software User’s Manual
Trap Configuration
19
3.2 Trap Configuration
Trap configuration defines how various alarms events are handled. Traps can be configured to be logged,
sent to the SNMP managers in the Trap Notification/Destination Table, or both logged and sent for each
event. Traps can also be set to Disabled. Individual traps are grouped together for convenience.
Trap Config Item Traps Affected MIB Location
Master Trap Control All
User Port Link Traps linkUp (User Port) ifmib.my
linkDown (User Port) ifmib.my
Network Port Link
Traps
linkUp (Network Port) ifmib.my
linkDown (Network Port) ifmib.my
Remote Fault Traps cp9145EPortRemoteFaultReceived cp9145EStatus.my
cp9145EPortSendingRemoteFault cp9145EStatus.my
cp9145EPortRemoteFaultCleared cp9145EStatus.my
Link Loss Forwarding
Traps
cp9145EPortLLFActivated cp9145EStatus.my
Cold Start Traps coldStart v2-mib.my
Authentication Traps cpAuthenticationFailure cpMgmtStatus.my
Diagnostic Traps cpPortLoopbackOn cpLoopback.my
cpPortLoopbackOff cpLoopback.my
Entity Configuration
Traps
entConfigChange EntityMib.my
Fan/Power/
Temperature Traps
cpMainBoardVoltageLevelsOK cpStatus.my
cpMainBoardVoltageLevelsOutOfRange cpStatus.my
cpDyingGasp cpPowerSupply.my
cpPowerSupplyFailed cpPowerSupply.my
cpPowerSupplyOverHighLimit cpPowerSupply.my
cpPowerSupplyUnderLowLimit cpPowerSupply.my
cpPowerSupplyOK cpPowerSupply.my
cpFanShutDownDueToLowTemperature cpFanStatus.my
cpFanOK cpFanStatus.my
cpFanSlow cpFanStatus.my
cpFanFailed cpFanStatus.my