2 lockout/logout configuration, 3 vlan configuration – CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 User Manual
Page 58
9145E NID Software User’s Manual
Port Information
Port Configuration
50
5.2.3 VLAN Configuration
From the Port Configuration menu, select VLAN Configuration (3) and press Enter. The VLAN
Configuration screen (Figure 5-6) opens. Use the VLAN Configuration menu to display and configure the
VLAN parameters. When all VLAN functions have been set, press Esc to return to the Port Configuration
menu.
Figure 5-6 VLAN Configuration Menu
5.2.3.1 VLAN Rules
From the VLAN Configuration screen, select VLAN Rules (1) and press Enter to access the VLAN Rules
screen. Use the VLAN Rules screen (Figure 5-7) to configure the VLAN parameters listed below.
Type the item number to change and press Enter. Use Tab or Enter to change columns. Use the Space
Bar to cycle between Yes and No. Type VLAN IDs and Priorities into the designated areas. Press Enter to
accept changes. When all VLAN parameters have been set, press Esc to return to the VLAN Configuration
menu. NOTE: Service frames do not include traffic destined to the 9145E Management host.
Figure 5-7 VLAN Rules Screen
Canoga Perkins Corp. Ethernet Network Interface Device 12-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02:59:35
----------------------------------VLAN CONFIGURATION-----------------------------------
1) VLAN Rules
2) Port VLAN ID Translation Table
3) P-Bit Translation Tables
Select [1-3]:
---------------------------------------------Messages----------------------------------------------
Canoga Perki ns Corp. Ethernet Network Interface Devi ce 12-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02: 59: 35
---------------------------------------VLAN RULES--------------------------------------------
User Port
Net Port
1) Drop Untagged Packets?
No
No
2) Drop Packets with VLAN Tag
not
matching
VLAN
Tag
A? No
No
3) Remove outermost VLAN Tag?
No
No
4) Add VLAN Tag B to Untagged
Packets only?
No
No
5) Add VLAN Tag C to Tagged
Packets only?
No
No
6) Add VLAN Tag C to Tagged
Packets
only
using
P-Bits
of outermost V LAN tag?
No
No
7) Tag A VLAN ID (0 - 4095)
0
0
8) Tag B VLAN ID (0 - 4095)
0
0
Priority (0 - 7)
0
0
9) Tag C VLAN ID (0 - 4095)
0
0
Priority (0 - 7)
0
0
Select [1-9]:
---------------------------------------------Messages----------------------------------------------