CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 63)

Port Information 9145E NID Software User’s Manual
Port Configuration
55
5.2.5 Port Based VLAN Control
The Port Based VLAN Control screen (Figure 5-11) is used to specify which VLANs, if any, are allowed to
pass through each port. The 9145E can be configured to support up to 100 VLANs.
From the Port Configuration screen, select Port Based VLAN Control (5) and press Enter. The Port Based
VLAN Control screen (Figure 5-11) opens. The default setting is All VLANs Allowed. In order to specify
which VLANs will be included or excluded, use the Add, Add Range, Delete, and Delete Range controls at
the bottom of the screen. Use Esc to return to the Port Based VLAN Control screen.
Figure 5-11 Port Based VLAN Control Screen
1. PBVC Mode - This setting determines which ports are enabled. Use the Space Bar to select User
Port Enabled Only, Net Port Enabled Only, Both Ports Enabled, or Disabled. A setting of Disabled
will allow all VLANs to pass through both ports.
2. Add - This function is used to add one VLAN ID at a time to the screen list. Enter the VLAN ID you
want to add and press Enter. The value must be between 2 and 4094.
3. Add Range - This function is used to add a group of VLAN IDs to the screen list. Enter the group
of VLAN IDs you want to add and press Enter. The value must be between 2 and 4094.
4. Delete - This function is used to remove one VLAN ID at a time from the screen list. Enter the
VLAN ID you want to remove and press Enter. The value must be between 2 and 4094.
5. Delete Range - This function is used to remove a group of VLAN IDs from the screen list. Enter
the group of VLAN IDs you want to remove and press Enter. The value must be between 2 and
4094.
Canoga Perkins Corp. Ethernet Network Interface Device 12-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02:59:35
-------------------------------------PORT BASED VLAN CONTROL---------------------------------
Port Based VLAN Control List:
2 12 22 32 42 54 64 75 85
3 13 23 33 43 55 65 76 86
4 14 24 34 44 56 66 77 87
7 17 27 37 49 59 69 80 90
8 18 28 38 50 60 71 81 91
9 19 29 39 51 61 72 82 92
10 20 30 40 52 62 73 83
11 21 31 41 53 63 74
PBVC Mode: Disabled
Select [(1) PBVC Mode, (2) Add, (3) Add Range, (4) Delete, (5) Delete Range]:
--------------------------------------------------Messages--------------------------------------------------