CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 38)

9145E NID Software User’s Manual System Configuration
RADIUS Client Configuration
30
Figure 3-18 RADIUS Client Configuration screen
1. RADIUS Client Mode - Determines from where the client can access the 9145E. Use the Space
Bar to cycle through RADIUS then Local, Local then RADIUS, and None.
2. RADIUS Server IP Address - Provides the IP address of the RADIUS server. Use Backspace to
remove an existing IP address and type in a new IP address.
RADIUS Server Shared Secret - This is the security question the user must answer before
remote access is allowed. Use Backspace to remove an existing question and type in a new
question. Questions are limited to 16 characters.
RADIUS Server Retries - Specifies the number of times a user can enter the wrong Shared
Secret response before they are locked out of the system. Enter a value between 0 and 10.
RADIUS Server Timeout - Specifies the length of time, in seconds, the server will wait for a
response before it times out. Enter a value between 1 and 30.
RADIUS Server Priority - Determines the order in which the RADIUS servers are consulted.
Enter a value between 1 and 255.
Canoga Perkins Corp. Ethernet Network Interface Device 22-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02:59:35
--------------------------RADIUS CLIENT CONFIGURATION----------------------------
1 Radius Client Mode : None
2 Radius Server IP Address : 172.224.014.35
Radius Server Shared Secret : Fido
Radius Server Retries : 3
Radius Server Timeout : 30
Radius Server Priority : 1
3. Radius Server IP Address : 168.123.055.23
Radius Server Shared Secret : Rover
Radius Server Retries
: 3
Radius Server Timeout : 30
Radius Server Priority : 2
Select [1-3]:
--------------------------------------------Messages-----------------------------------------------