Panasonic DVD-A105U - Manual (Page 76)

ENGLISH
Initial settings
Selecting digital output El
Select the digital output to be output from the optical/coaxial
digital audio output connector of the unit.
7 At the initial settings screen
Press A/V to select “7 Digital Audio Out­
put” and press SELECT.
Digital Audio Output
(SO |1 LPCM (DVD) Off I
CS3 2 Dolby Digital Bitstream
OD
m.
ûûû vW_
0 Exit
2
Press A/T to select the preferred item
(1 or 2) and press SELECT.
When “1 LPCM (DVD)” is selected
Off: Only linear PCM of 48 kHz/16 bit is output from
the digital audio output connector. During play­
back of the DVD recorded in the linear PCM of
48 kHz/20 bit/24 bit or 96 kHz, no digital audio is
output. (Factory preset)
PCM: During playback of the DVD recorded in the lin­
ear PCM of 48 kHz/20 bit/24 bit or 96 kHz, digital
audio converted to 48 kHz/16 bit is output.
{Digital output of PCM audio is restricted to
48 kHz/16 bit or below for copyright protection.)
When “2 Dolby Digital” is selected
Bitstream: Dolby Digital (AC-3) bitstream (2ch-5.1ch) is
output. (Factory preset)
PCM: PCM (2ch) of 48 kHz/16 bit is output.
O Press A/V to select the preferred value at
each screen and press SELECT.
The screen illustrated in step 1 is displayed. Press A / T to
select “0” and press SELECT to return to the initial settings
screen.
For your reference:
• Make settings as shown in the table E depending on the kind of
amplifier that is connected to the optical/coaxial digital audio output
connector.
"'Audio output from the unit’s audio output connectors is converted to
48 kHz/16 bit in addition to audio trom the digital audio output
connector.
To enjoy high quality sound at 48 kHz/20 bit/24 bit or 96 kHz, con­
nect the amplifier or decoder directly to the audio output connectors,
not to the digital audio output connector, [Select “Off at the
“1 LPCM (DVD)”.]
"^When connecting an amplifier (with an optical/coaxial digital input
connector) which does not contain the Dolby Digital (AC-3) decod­
er, be sure to select “PCM”. If “Bitstream” is selected, any attempt
to play DVDs may cause such a high level of noise that it may be
harmful to your ears and damage your speakers.
76
\ Also refer to “Common procedures of initial settings” on
I page 64.
(ZD
CD
■STOP H^STIILPAUSE »PLAY
CD
^<SKIPn. «rmìfe^EARCH»-»- D
1 2 3
O Q o
4 5 6
o o o
Recommendable
connected
LPCM
(DVD)
Dolby
Digital
No amplifier is connected Off Bitstream
AV amplifier (with digital audio input
connector) without Dolby Digital
decoder
PCM* *' PCM*2
AV amplifier including Dolby Digital
decoder
PCM*' Bitstream
Type d’amplificateur à raccorder
Réglage
recommandé
LPCM
(DVD)
Dolby
Digital
Aucun amplificateur raccordé Non Bitstream
Amplificateur AV (avec connecteur
d’entrée audio numérique) sans
décodeur Dolby Digital
PCM*' PCM"2
Amplificateur AV équipé d'un
décodeur Dolby Digital
PGM*' Bitstream
m
Tipo de amplificador que va a
ser conectado
Ajuste
recomendado
LPCM
(DVD) Dolby
Digital
No está conectado un amplificador No Bitstream
Amplificador AV (con conectore de
entrada de audio digital) sin
descodificador Dolby Digital
PCM"' PCM"2
Amplificador AV incluyendo
descodificador Dolby Digital
PCM*1 Bitstream