Industrial Data Systems IDS 430 User Manual
Page 16
IDS 430/433 Users Manual Version 1.0
- 16 -
stores it in the tare register. The IDS 430/433 switches to NET mode and
displays the net weight.
KEYBOARD TARE:
Use the numeric keys to enter a tare weight. Press the TARE key. The IDS
430/433 stores the entered weight in the tare register and switches to NET
mode and displays the net weight.
CLEAR TARE:
Press the numeric ZERO key. Press the TARE key. The tare weight is
cleared to zero and the IDS 430/433 switches to the GROSS mode displaying
the gross weight.
Gross/Net
Press the Gross/Net key to alternate between Gross and Net display modes.
Press the PRINT key to print weight data. Page format 1 is printed if the IDS
430/433 is in Gross display mode and page format 2 is printed in the Net display
mode. See the
Parameter Functions
section (Page 7-5) for setup of print
formats.
F1 and F2
The F1and F2 keys can be configured to execute any scale basic function, see
(parameters 57 and 58 to set the key functions).
When the indicator is in data entry mode, the F1 key can be used for entering a
minus sign; the F2 key can be used to enter a decimal point.
Memory Register Entry
Use the numeric keypad to enter the memory register number (1 to 16). Press
the ENTER key. The IDS 430/433 displays "reg xx" for 1 second and then
displays the current memory register value. Press the CLEAR key if no change is
to be made or enter a new value and then press the ENTER key. Memory
registers are used by the Event Monitor to calculate setpoint values store weight
data and execute math functions.
NOTE
: memory registers are set to zero at power up unless the battery back up
is enabled CFG 41.
Execute a Scale Basic Function
The IDS 430/433 provides up to 16 user programmable functions. User
programs 1 thru 16 can be executed by entering 1 to 16 respectively for the key
function parameter (CFG parameters 51 – 58). See the "Scale Basic / Event
Monitor" manual or quick reference guide for more information.
Display Time/Date
Enter 19 to display the time. Press Enter to display the date. Press Enter again to
return to Gross/Net display.