7 peak hold function – Industrial Data Systems IDS 430 User Manual
Page 26
IDS 430/433 Users Manual Version 1.0
- 26 -
# 7 Peak Hold Function
The peak hold register maintains the peak weight detected by the weight
indicator.
Enable Peak Hold
Access configuration parameter 75. Enter a 1 to enable peak hold, enter a 0 to
disable peak hold.
Clear Peak Hold Register
Press the CLEAR key to reset the peak hold register to 0.
Use the Scale Basic built in function Clear Peak [143] to reset the peak hold
register.
Display Peak Weight
Use the GROSS/NET key to scroll thru the display options as follows:
Initial mode:
Display gross weight. Gross LED on.
First GROSS/NET press:
Display net weight.
Net LED on.
Next GROSS/NET press:
Display gross peak weight. Gross LED flashing.
Next GROSS/NET press:
Display net peak weight. Net LED flashing.
Next GROSS/NET press:
Display gross weight.
Gross LED on.
Etc.
Print Peak Weight
Use function 65 (Configure Print Formats) to format the print output using page 1:
Print Item 19:
Print Gross Peak weight on page 1.
Print Item 20:
Print Net Peak weight on page 1.