ALTANA Micro-Wave-Scan Manual User Manual
Page 11
10
System description and Delivery notes
2. System description and Delivery notes
Please read the instruction manual before using
the instrument and note the safety instructions.
The measurement unit is used to evaluate the
appearance of high-quality surfaces (Orange Peel,
DOI).
The measurement system consists of the portable
measurement device, docking station and the
smart-chart program.
Depending on the application, the system can be
used in various ways, from single measurements in
R & D up to routine quality control procedures (e.g.
automobile).
In order to guarantee a flexible data analysis, it is
essential to allocate the data to a clearly defined
object (identification).
The so-called “Organizer” file clearly defines the
object to be measured. The Organizer needs to
be created in the smart-chart software and defines
the measurement sequence (sampling procedure).
This file is transferred to the instrument then to
guide the user during measurement.
Organizer
Center Hood n=1/3
L
7.6
S
18.3