ALTANA Micro-Wave-Scan Manual - Manual (Page 40)

39
9.4 Statistic
If the number of measurements is set to greater
than 1, statistics values are shown in the display
after measurement.
You can select the values to be displayed in the
Statistic submenu.
The current setting is identified by a dot at the end
of the line.
Use the scroll wheel to move the cursor to the
desired setting and press the operate button. The
selection is accepted and the instrument returns to
the previous menu.
Average
Display of the arithmetic mean x.
Average/Range
Display of the arithmetic mean x and the difference
between the maximum and minimum value.
Average/St.Dev.
Display of the arithmetic mean x and the standard
deviation.
Average/Std.Err.
Display of the arithmetic mean x and the standard
error .
Standard deviation:
Standard Error:
Configuration
ε =
s
n
2