ALTANA Micro-Wave-Scan Manual - Manual (Page 12)

11
The saved results are transferred to the PC and
displayed as a QC report.
The data is saved in a database for further analysis
over time. Pre-prepared test reports in the smart-
chart software assist in analyzing the data.
Storage structure
Each measurement series contains a header and
the individual measurements with name (test zone)
and measured values.
In the header, up to 5 parameters can be defined
for object identification. Parameters 1 to 3 are
defined in the Organizer file, parameters 4 and 5
can be entered before storage in the data base.
Additionally, date and time of the measurement are
stored.
This structure determines the data organization
in the instrument and in the data base. In
addition to using Organizers, i. e. definition of
parameters before the measurements, parameters
and test zones can also be entered during the
measurements. See chapter “Memory”.
System description and Delivery notes