ALTANA Micro-Wave-Scan Manual - Manual (Page 37)

36
Configuration
9.3 Scale
Up to 10 scales may be selected for the display of
the measurement results.
Select the desired scale to be changed and press
the operate button.
Following scales are available:
Longwave
(0...100)
Shortwave (0...100)
The classical scales
Longwave (1,2 - 12 mm) and
Shortwave (0,3 - 1.2 mm)
DOI (Dorigon) (47...96)
Correlation to ASTM E 430, value range similar to
20° gloss.
DOI (GM) (47...96)
GM specification
DOI (BYK) (30...100)
Higher resolution but lower values than DOI
(Dorigon)
du (1...60)
Dullness, fine structures smaller than 0.1 mm
Wa...Wd (0...100)
The structure spectrum is evaluated by applying
filter functions to the measured optical profile.
The values Wa...Wd stand for the respective
wavelength/range.